Ask a room of careers advisers to name a well paid job that needs no degree and few will say elevator mechanic, yet it is the best paid trade in America, with a median of $106,580 a year. Ask who holds those jobs and the answer is more lopsided: women are about half the workforce but only 4.3 percent of the people actually working in the construction trades. That gap is now a practical problem for the industry, not just a fairness argument. Employers face hundreds of thousands of openings a year, retirements are outrunning recruitment, and the fastest growing source of new tradespeople is women. This guide sets out which trades pay women the most, what the entry routes really look like, and which barriers are worth planning around.
In short: high-paying trades for women
The highest paying trades for women are the highest paying trades, full stop: elevator and escalator installation, with a median of $106,580 a year, electrical power line work at $92,560, and aircraft mechanics at $78,680, followed by plumbers, electricians, wind turbine technicians and HVAC mechanics in the high $50,000s to low $60,000s, all figures from the U.S. Bureau of Labor Statistics for May 2024. Pay in the trades is set by license level, experience and, on union work, a published contract scale, so the money does not depend on who holds the tools. The standard route in is a registered apprenticeship, paid from the first day and four to five years long in the licensed trades. Women were 4.3 percent of construction trades workers in 2024, but 5.4 percent of apprentices, and both numbers are climbing.
Where women stand in the trades today
Start with the honest picture. The Institute for Women’s Policy Research, working from the Bureau of Labor Statistics Current Population Survey, counted 366,360 women working in construction and extraction occupations in 2024, the highest number ever recorded and 77 percent more than in 2015. That still makes women only 4.3 percent of the people on the tools. In the wider construction industry, counting office, professional and management roles, women hold about 11 percent of jobs, and about 10.5 percent of construction manager roles.
The share varies by trade. Women are about 4.2 percent of carpenters, 3.5 percent of construction laborers, around 3.2 percent of plumbers, pipefitters and steamfitters, and under 3 percent of electricians on the 2024 figures, with more recent survey readings putting electricians nearer 3.5 percent. Those are small shares, but the direction matters for anyone choosing a trade now. The number of women in construction apprenticeships grew by about 186 percent between 2015 and 2024, from 3,789 to 10,834, and women are a larger share of apprentices (5.4 percent) than of the trades overall, which means the workforce share will keep rising as those apprentices qualify.
Demand is the other half of the picture. The U.S. Bureau of Labor Statistics Occupational Outlook Handbook projects about 81,000 openings for electricians every year from 2024 to 2034, about 44,000 a year for plumbers, pipefitters and steamfitters, and about 40,100 a year for HVAC mechanics and installers, most of them replacing people who retire or leave. An industry that needs that many new entrants cannot afford to recruit from only half the population, and increasingly it knows it.
The highest paying trades, and what they actually pay
One thing to understand before the list: the pay figures below are medians for everyone in each occupation. There is no separate women’s rate card. A licensed woman electrician is paid as an electrician, and on union work the rate is set by the contract for her classification and step. What differs for women is not the rate but the odds of getting in and staying in, which is why the entry routes and barriers sections of this guide matter as much as the numbers.
| Trade | Median pay, May 2024 | Top 10 percent earn over | Job outlook, 2024 to 2034 |
|---|---|---|---|
| Elevator and escalator installers and repairers | $106,580 | $149,250 | Faster than average |
| Electrical power line installers and repairers | $92,560 | $126,610 | Faster than average |
| Aircraft and avionics equipment mechanics | $78,680 | $120,080 | About average |
| Plumbers, pipefitters and steamfitters | $62,970 | $105,150 | 4 percent growth, about 44,000 openings a year |
| Electricians | $62,350 | $106,030 | 9 percent growth, about 81,000 openings a year |
| Wind turbine service technicians | $62,580 | $88,090 | Among the fastest growing occupations in the country |
| HVAC mechanics and installers | $59,810 | $91,020 | 8 percent growth, about 40,100 openings a year |
Source: U.S. Bureau of Labor Statistics, Occupational Outlook Handbook and Occupational Employment and Wage Statistics, May 2024. The full ranking, including boilermakers, ironworkers and industrial machinery mechanics, is in our guide to the highest paying trade careers.
Elevator and escalator installers: the six figure trade
Elevator work sits at the top of the pay table by a wide margin, and it is also one of the most structured routes in. Entry runs almost entirely through the apprenticeship program of the International Union of Elevator Constructors, a four to five year earn while you learn program with a competitive intake. The work suits people who like mechanical and electrical systems in equal measure and are comfortable with heights and confined spaces. Openings are fewer than in the big three trades, roughly a couple of thousand a year, so persistence at application stage is part of the price.
Electricians and power line workers
Electrical work offers two high paying paths. Electricians, at a $62,350 median with 9 percent projected growth, are the largest of the licensed trades, with the broadest choice of employers, specialties and places to live, and a clear ladder from apprentice to journeyman to master electrician to running your own shop. Electrical power line installers, at $92,560, do the outdoor, high voltage end of the work for utilities and line contractors; the pay reflects storm call outs, overtime and the physical demands of climbing and working at height in bad weather.
Plumbers, pipefitters and HVAC mechanics
Plumbers, pipefitters and steamfitters post a $62,970 median, and the top tenth clear $105,150, with master plumbers who own their businesses earning beyond the employee figures entirely, since the Bureau of Labor Statistics wage survey counts employees only. HVAC mechanics and installers, at $59,810 with 8 percent growth, have one of the shortest training routes of the licensed trades, often a certificate program of under two years plus the federal EPA Section 608 certification for handling refrigerants, and steady year round service work in most climates.
Wind turbine technicians and the energy trades
Wind turbine service technicians earn a $62,580 median, and the occupation has been at or near the top of the federal growth table for years as wind capacity expands. Training is comparatively short, typically a certificate program, and the work is rural, physical and at height. Solar photovoltaic installers, at a $51,860 median, pay less at the middle but are also growing very fast and are one of the quickest routes into paid trade work. For a wider comparison of pay, training length and demand across the trades, see our guide to the best trade jobs to get into.
The entry routes that actually work
Registered apprenticeships
The main door into the licensed trades is a registered apprenticeship, listed on the U.S. Department of Labor’s Apprenticeship.gov finder. An apprentice is an employee from day one: she works under licensed supervision, attends classroom instruction, usually one day a week or in blocks, and earns scheduled raises as she logs hours and passes stages. In electrical and plumbing the full journey to journeyman status typically takes four to five years and 8,000 or so working hours. There are two flavors. Union programs are run jointly by the union and its signatory contractors through local training committees, and are usually free to the apprentice. Non union programs are run by contractor associations, individual employers and community colleges, and may charge for the classroom part. Both lead to the same state license exams.
Pre-apprenticeship programs
Pre-apprenticeships are shorter courses, often six to sixteen weeks, that teach tool basics, site safety, construction math and interview preparation, and feed graduates into full apprenticeships. Many of the best known are built specifically for women. The U.S. Department of Labor funds some of them through its Women’s Bureau Women in Apprenticeship and Nontraditional Occupations (WANTO) grant program, and long established nonprofits such as Nontraditional Employment for Women in New York and Tradeswomen Inc. in California run their own. For someone changing careers with no construction background, a pre-apprenticeship is the fastest way to become a credible apprenticeship applicant, and it answers the confidence question honestly: you find out whether you like the work before you commit four years to it.
Trade school and direct entry
Community college and trade school certificates suit some trades better than others. They are a common front door for HVAC, welding and wind energy, where employers hire certificate holders into helper and technician roles. For the licensed construction trades they are a weaker substitute for an apprenticeship, because license hours usually have to be worked under a licensed employer anyway. Direct entry as a laborer or helper still exists, especially with smaller contractors, and it can work well, but the structured programs above produce faster wage growth because the raises and the classroom sequence are built in.
The barriers, stated plainly
None of the barriers below are about ability, and pretending they do not exist does no favors to anyone planning a career. They are practical problems with practical countermeasures.
- Being the only one. On many crews a woman is the first tradeswoman her coworkers have worked with. That brings scrutiny that has nothing to do with her work, and it is tiring. It eases with numbers, which is one reason the rising apprentice share matters, and tradeswomen’s networks exist partly to break the isolation.
- Kit and facilities designed around men. Ill fitting gloves, harnesses and protective clothing are a safety issue, not a comfort issue, and some sites still lack adequate toilets and changing space. Federal safety rules require employers to provide properly fitting personal protective equipment, and good employers now stock women’s sizes as a matter of routine. Ask about both before you sign on.
- Hours and care responsibilities. Early starts, overtime and travel are features of trade work, and apprenticeship classes can clash with childcare. This is not unique to women, but it falls unevenly. Predictable scheduling, where employers offer it, is one of the strongest retention tools the industry has.
- Culture and harassment. Most crews are professional. A minority are not, and a bad first placement is a common reason women leave in year one. Union programs and larger employers have formal reporting routes and the ability to move an apprentice to another contractor, which is a real structural advantage of the big programs.
- Nobody showed them the door. The most common barrier is the earliest one: many women were simply never told the trades were an option, by schools, families or careers services. That is changing as the pay numbers in this article circulate more widely.
What employers and programs are doing about it
If you manage or own a business that hires tradespeople, the other side of this story is a recruitment pool your competitors mostly ignore. The employers making progress tend to do unglamorous things well. They stock protective equipment in women’s sizes and provide decent facilities without being asked. They recruit through pre-apprenticeship programs and tradeswomen’s organizations instead of relying on word of mouth from an all male workforce. They pair new apprentices with an experienced mentor, and they act quickly and visibly when behavior crosses a line. Industry groups have built infrastructure around this too: the North America’s Building Trades Unions’ Tradeswomen Build Nations conference is the largest gathering of tradeswomen in the world, and the National Association of Women in Construction runs chapters and mentoring across the country. The business case needs no embellishment. In a market short of hundreds of thousands of workers, the firm that can recruit and keep the other half of the population wins work its rivals cannot staff.
A realistic plan for the first year
Months one and two: pick your trade using the pay and demand table above and an honest look at the work itself, then check your state’s licensing rules so you know the end point. Months two to four: apply to apprenticeship intakes, which often open only once or twice a year, and enroll in a pre-apprenticeship if one runs near you. Apply to both union and non union programs; the best program is the one that starts you soonest. Months four to twelve: start work, protect your attendance record, which is the single thing that gets apprentices removed, and keep every certificate, hour log and evaluation. By the end of year one you should be earning above entry level wages in most trades, debt free, and roughly a quarter of the way to a license that puts your pay in the tables above.
What the application process actually involves
Apprenticeship selection is more like a job competition than a college admission. Most programs ask for a high school diploma or equivalent, a valid driving license and the physical ability to do the work, and many set an aptitude test covering basic algebra, reading comprehension and spatial reasoning, the kind of test a few weeks of practice genuinely improves. Union programs typically rank applicants by test and interview score and work down the list as places open, which is why applying early and reapplying if you miss an intake are both normal. Expect a wait of months, not weeks, between applying and starting in the most competitive trades, and expect drug screening and a physical. None of it requires construction experience; programs assume they are training you from zero, and the applicants who do best are usually the ones who arrive able to show up on time, every time, from the first morning.
Sources used for this article
- U.S. Bureau of Labor Statistics, Occupational Outlook Handbook: Electricians, and the companion Handbook pages for plumbers, pipefitters and steamfitters, HVAC mechanics and installers, and elevator installers and repairers: median pay for May 2024, top decile earnings, projected growth and annual openings for 2024 to 2034.
- Institute for Women’s Policy Research, Numbers Matter: Women Working in Construction: 366,360 women in construction and extraction occupations in 2024, 4.3 percent of trades workers, trade by trade shares, and the growth in women apprentices from 3,789 in 2015 to 10,834 in 2024, calculated from Bureau of Labor Statistics Current Population Survey data and federal apprenticeship records.
- U.S. Department of Labor, Apprenticeship.gov: registered apprenticeship structure and program finder.
- U.S. Department of Labor, Women’s Bureau: Women in Apprenticeship and Nontraditional Occupations (WANTO) grant program.
Frequently asked questions
What is the highest paying trade for women?
Elevator and escalator installation, with a median of $106,580 a year in May 2024 and top earners above $149,250, according to the Bureau of Labor Statistics. Pay in the trades is not set by gender: it follows the trade, the license level and, on union work, a published contract scale, so the highest paying trades for women are the highest paying trades overall. Electrical power line work, at $92,560, and aircraft mechanics, at $78,680, come next.
What percentage of trades workers are women?
About 4.3 percent. The Institute for Women’s Policy Research counted 366,360 women in construction and extraction occupations in 2024, the highest number ever recorded, up 77 percent since 2015. Women hold about 11 percent of jobs in the wider construction industry once office, professional and management roles are included, and about 5.4 percent of construction apprenticeship places.
Do women need a degree to earn high pay in the trades?
No. The licensed trades are entered through registered apprenticeships, which pay a wage from the first day and typically take four to five years, not through college. The cost to the apprentice on union programs is usually zero, and on non union programs it is generally limited to the classroom portion. A license, not a degree, is what unlocks journeyman pay.
What is the best way for a woman to get into the trades?
A registered apprenticeship is the main route, and a pre-apprenticeship course is the strongest preparation for it. Pre-apprenticeships built for women, some funded through the Department of Labor’s WANTO grants, teach tool skills, safety and construction math over a few weeks and connect graduates to apprenticeship intakes. Applying to both union and non union programs improves your chances, because intakes often open only once or twice a year.
What barriers do women face in the trades?
The documented barriers are practical rather than about ability: being the only woman on a crew, protective equipment and site facilities designed around men, early starts and overtime that clash with care responsibilities, occasional poor behavior on site, and simply never having been told the trades were an option. Each has a working countermeasure, from properly fitting protective equipment and mentoring to pre-apprenticeship programs and formal reporting routes on the large programs.
Which trades are growing fastest for new entrants?
Wind turbine service technicians are among the fastest growing occupations in the country, and solar photovoltaic installers are close behind. Among the large licensed trades, electricians are projected to grow 9 percent from 2024 to 2034 with about 81,000 openings a year, and HVAC mechanics 8 percent with about 40,100 openings a year, mostly replacing retiring workers, according to the Bureau of Labor Statistics.

